DINEX DH 86H



This model is a high-performance mobile crane with a capacity of up to 8 tons. While maintaining the technical specs of the DINEX DH86, this model is more advanced with the wider H-type outriggers and a negative angle boom pitch capability. The latter feature allows the boom tip to be pitched down to the ground which provides the DINEX CRANE DH86H with the option of a basket installation.

General Overview

  • Wide H-type outriggers
  • Negative angle pitch boom
  • Tensosensor
  • Multi-level safety system
  • Hook lifting distance limitation system
  • Additional winch
DESCRIPTION UNITS DATA
SUBJECT TO CHANGE FOR THE IMPROVEMENT OF THE QUALITY WITHOUT PRIOR NOTICE.
Mounting chassis ton Over 7 MT payload
Load capacity
(6 sections respectively)
kg/m Max. 7200/2.4

3935/4.7
2080/7.7
1230/10.7
835/13.7
580/16.8
400/19.8

Max. side reach m 19.8
Max. lifting height m 22.8
Rated oil flow l/min 51
Rated oil pressure bar 200
Oil tank capacity l 160
Boom shape/sections Hexagonal/6
Boom
raising/lowering speed
deg/sec -16-80
Rotation speed rpm 1.8
Slewing angle deg 360 continious rotation
Winch 6х29хIWRC
Ø 10mm Х 120m
Crane weight kg Appr. 3,200 (excluding subframe)
Safety devices Overload prevention device (automatic stop with alarm sound), winch over-winding prevention device, load indicator, hydraulic relief valve, hydraulic holding valve (boom extension, retraction, raising and lowering),outrigger jack check valve, winch auto brake, slewing reducer, hydraulic brake, hook safety link
Outrigger/span
m
H-type
6.0

All rights are reserved. No part of any material on this web site may be reproduced, or stored in a database or retrieval system, distributed, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the DINEX CRANE Company. The material is protected by copyright law.